Home › Code lookup › P0067
Powertrain code · Fuel and air

P0067 Air Assisted Injector Control Circuit High

How urgent? Book a check when convenient

What it means

Some engines blow a small stream of air past the fuel injectors to break the fuel into a finer mist. The computer found that the control for this air-assist system has a voltage that is too high.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the air-assist hoses and valve
  2. Check the valve wiring and connector

Signs you may notice

  • Check engine light on
  • Possible rough idle or hesitation, mostly when cold

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty air-assist control valve or solenoid
  • CommonDamaged wiring or connector
  • PossibleEngine computer driver fault

Typical repair once the cause is confirmed

Usually a wiring repair or a new air-assist control valve.

Walk through it step by step: Rough idle or shaking when stopped →

Common questions

What does P0067 mean?

Some engines blow a small stream of air past the fuel injectors to break the fuel into a finer mist. The computer found that the control for this air-assist system has a voltage that is too high.

Can I drive with code P0067?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0067?

Common possibilities to test include: faulty air-assist control valve or solenoid; damaged wiring or connector; engine computer driver fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.