Home › Code lookup › P0069
Powertrain code · Fuel and air

P0069 Manifold Absolute Pressure - Barometric Pressure Correlation

How urgent? Book a check when convenient

What it means

With the engine off or at key-on, the pressure in the intake manifold should match the outside air pressure. The computer found that the manifold pressure and barometric pressure readings do not agree.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare MAP and barometric readings with the key on and engine off
  2. Inspect the MAP sensor hose and port for blockage

Signs you may notice

  • Check engine light on
  • Usually little change in driving
  • Possible hard starting or rough running

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty MAP sensor
  • CommonFaulty barometric pressure sensor (sometimes built into another sensor or the computer)
  • CommonClogged, cracked or disconnected MAP sensor hose
  • PossibleWiring or connector problem

Typical repair once the cause is confirmed

Usually a new MAP sensor, or clearing a blocked hose or port.

Repair costInsufficient verified pricing for this vehicle and repair
Walk through it step by step: Check engine light on →

Common questions

What does P0069 mean?

With the engine off or at key-on, the pressure in the intake manifold should match the outside air pressure. The computer found that the manifold pressure and barometric pressure readings do not agree.

Can I drive with code P0069?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0069?

Common possibilities to test include: faulty map sensor; faulty barometric pressure sensor (sometimes built into another sensor or the computer); clogged, cracked or disconnected map sensor hose; wiring or connector problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.