Home › Code lookup › P006A
Powertrain code · Fuel and air

P006A MAP - Mass or Volume Air Flow Correlation (Bank 1)

How urgent? Book a check when convenient

What it means

The computer compares the manifold pressure sensor with the mass air flow sensor. Their readings for bank 1 do not agree, which usually means an air leak or a bad sensor.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Look for cracked intake hoses and vacuum leaks
  2. Clean or test the MAF sensor
  3. Compare MAP and MAF readings with a scan tool

Signs you may notice

  • Check engine light on
  • Rough idle or hesitation
  • Possible poor fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonVacuum or intake leak
  • CommonDirty or faulty MAF sensor
  • CommonFaulty MAP sensor
  • PossibleWiring problem at either sensor

Typical repair once the cause is confirmed

Usually fixing an air leak or replacing the MAF or MAP sensor.

Walk through it step by step: Check engine light on →

Common questions

What does P006A mean?

The computer compares the manifold pressure sensor with the mass air flow sensor. Their readings for bank 1 do not agree, which usually means an air leak or a bad sensor.

Can I drive with code P006A?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P006A?

Common possibilities to test include: vacuum or intake leak; dirty or faulty maf sensor; faulty map sensor; wiring problem at either sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.