Home › Code lookup › P006B
Powertrain code · Fuel and air

P006B MAP - Exhaust Pressure Correlation

How urgent? Book a check when convenient

What it means

Mostly on diesels, the computer compares intake manifold pressure with exhaust pressure. The two readings do not line up the way they should.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the exhaust pressure sensor tube for soot clogging or cracks
  2. Compare both sensor readings with the engine off

Signs you may notice

  • Check engine light on
  • Possible loss of power

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonClogged or cracked exhaust pressure sensor tube
  • CommonFaulty exhaust pressure sensor
  • PossibleFaulty MAP or boost pressure sensor
  • PossibleWiring problem at either sensor

Typical repair once the cause is confirmed

Often cleaning or replacing the exhaust pressure sensor tube, or a new sensor.

Walk through it step by step: Check engine light on →

Common questions

What does P006B mean?

Mostly on diesels, the computer compares intake manifold pressure with exhaust pressure. The two readings do not line up the way they should.

Can I drive with code P006B?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P006B?

Common possibilities to test include: clogged or cracked exhaust pressure sensor tube; faulty exhaust pressure sensor; faulty map or boost pressure sensor; wiring problem at either sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.