Home › Code lookup › P0072
Powertrain code · Fuel and air

P0072 Ambient Air Temperature Sensor Circuit Low Input

How urgent? Book a check when convenient

What it means

The outside air temperature sensor, usually behind the front grille or bumper, tells the computer how warm it is outside. The computer found a signal that is too low (often reads very hot).

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the dash outside temperature reading against the real temperature
  2. Inspect the sensor and its wiring behind the grille or bumper
  3. Test the sensor resistance at a known temperature

Signs you may notice

  • Check engine light on
  • Wrong outside temperature on the dash
  • Automatic climate control may not work right

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonDamaged sensor, often from road debris or a minor front-end hit
  • CommonBroken or corroded wiring behind the bumper
  • CommonCorroded connector
  • PossibleFaulty module reading the sensor

Typical repair once the cause is confirmed

Usually a new ambient temperature sensor, which is an inexpensive part, or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace ambient air temperature sensor. Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P0072 mean?

The outside air temperature sensor, usually behind the front grille or bumper, tells the computer how warm it is outside. The computer found a signal that is too low (often reads very hot).

Can I drive with code P0072?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0072?

Common possibilities to test include: damaged sensor, often from road debris or a minor front-end hit; broken or corroded wiring behind the bumper; corroded connector; faulty module reading the sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.