Home › Code lookup › P007A
Powertrain code · Fuel and air

P007A Charge Air Cooler Temperature Sensor Circuit (Bank 1)

How urgent? Book a check when convenient

What it means

On turbocharged engines, the charge air cooler (intercooler) cools the boosted air. A sensor measures that air temperature, and the computer found a fault in the circuit from the bank 1 sensor.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the sensor connector and wiring
  2. Compare its reading with other temperature sensors after a cold soak

Signs you may notice

  • Check engine light on
  • Possible reduced power

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty charge air temperature sensor
  • CommonDamaged wiring or corroded connector
  • PossibleOil contamination in the connector

Typical repair once the cause is confirmed

Usually a new charge air temperature sensor or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace charge air temperature sensor. Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P007A mean?

On turbocharged engines, the charge air cooler (intercooler) cools the boosted air. A sensor measures that air temperature, and the computer found a fault in the circuit from the bank 1 sensor.

Can I drive with code P007A?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P007A?

Common possibilities to test include: faulty charge air temperature sensor; damaged wiring or corroded connector; oil contamination in the connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.