Home › Code lookup › P008A
Powertrain code · Fuel and air

P008A Low Pressure Fuel System Pressure - Too Low

How urgent? Get it checked in the next few days

What it means

On engines with both a low-pressure and a high-pressure fuel pump, the computer measured that the low-pressure side (the in-tank pump supply) is lower than it should be.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check low-side fuel pressure with a gauge
  2. Check the fuel filter and pump wiring

Signs you may notice

  • Check engine light on
  • Hesitation or loss of power
  • Hard starting or stalling

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWeak in-tank fuel pump
  • CommonClogged fuel filter
  • PossibleFaulty fuel pump control module or wiring
  • PossibleFaulty low-pressure fuel sensor

Typical repair once the cause is confirmed

Usually a new in-tank fuel pump or fuel filter.

Repair costInsufficient verified pricing for this vehicle and repair
Replace fuel pump module. Prepare an itemized shop request.
Walk through it step by step: Car has no power when accelerating →

Common questions

What does P008A mean?

On engines with both a low-pressure and a high-pressure fuel pump, the computer measured that the low-pressure side (the in-tank pump supply) is lower than it should be.

Can I drive with code P008A?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P008A?

Common possibilities to test include: weak in-tank fuel pump; clogged fuel filter; faulty fuel pump control module or wiring; faulty low-pressure fuel sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.