Home › Code lookup › P0096
Powertrain code · Fuel and air

P0096 Intake Air Temperature Sensor 2 Circuit Range/Performance (Bank 1)

How urgent? Book a check when convenient

What it means

Intake air temperature sensor 2 measures air temperature at a second point in the intake, often after the turbo or intercooler. The computer found a reading that does not make sense compared with other sensors from this sensor.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the sensor connector and wiring
  2. Compare its reading with other temperature sensors after a cold soak

Signs you may notice

  • Check engine light on
  • Usually little change in driving
  • Possible rough running or lower fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty intake air temperature sensor 2
  • CommonOil or dirt fouling the sensor
  • PossibleWiring with high resistance

Typical repair once the cause is confirmed

Usually a new intake air temperature sensor or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace intake air temperature sensor. Prepare an itemized shop request.

Known on these vehicles

Walk through it step by step: Check engine light on →

Common questions

What does P0096 mean?

Intake air temperature sensor 2 measures air temperature at a second point in the intake, often after the turbo or intercooler. The computer found a reading that does not make sense compared with other sensors from this sensor.

Can I drive with code P0096?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0096?

Common possibilities to test include: faulty intake air temperature sensor 2; oil or dirt fouling the sensor; wiring with high resistance. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.