P0097 Intake Air Temperature Sensor 2 Circuit Low (Bank 1)
What it means
Intake air temperature sensor 2 measures air temperature at a second point in the intake, often after the turbo or intercooler. The computer found a signal that is too low (often reads very hot) from this sensor.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the sensor connector and wiring
- Compare its reading with other temperature sensors after a cold soak
Signs you may notice
- Check engine light on
- Usually little change in driving
- Possible rough running or lower fuel economy
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty intake air temperature sensor 2
- CommonDamaged wiring or corroded connector
- PossibleSensor unplugged after other work
- PossibleEngine computer fault
Typical repair once the cause is confirmed
Usually a new intake air temperature sensor or a wiring repair.
Common questions
What does P0097 mean?
Intake air temperature sensor 2 measures air temperature at a second point in the intake, often after the turbo or intercooler. The computer found a signal that is too low (often reads very hot) from this sensor.
Can I drive with code P0097?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0097?
Common possibilities to test include: faulty intake air temperature sensor 2; damaged wiring or corroded connector; sensor unplugged after other work; engine computer fault. A shop should confirm the cause before replacing parts.