Home › Code lookup › P009A
Powertrain code · Fuel and air

P009A Intake Air Temperature/Ambient Air Temperature Correlation

How urgent? Book a check when convenient

What it means

After the car has sat long enough to cool down, the intake air temperature and outside air temperature readings should be close. The computer found that they disagree by too much.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare both readings with a scan tool after the car sits overnight
  2. Inspect both sensors and their connectors

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • Outside temperature on the dash may look wrong

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty intake air temperature sensor (often built into the MAF sensor)
  • CommonFaulty ambient air temperature sensor
  • PossibleWiring or connector problem on either sensor
  • PossibleCar parked in strong sun or near a heat source, skewing one reading

Typical repair once the cause is confirmed

Usually replacing whichever sensor reads wrong, often the intake air temperature sensor or MAF sensor that contains it.

Walk through it step by step: Check engine light on →

Common questions

What does P009A mean?

After the car has sat long enough to cool down, the intake air temperature and outside air temperature readings should be close. The computer found that they disagree by too much.

Can I drive with code P009A?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P009A?

Common possibilities to test include: faulty intake air temperature sensor (often built into the maf sensor); faulty ambient air temperature sensor; wiring or connector problem on either sensor; car parked in strong sun or near a heat source, skewing one reading. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.