Home › Code lookup › P009E
Powertrain code · Fuel and air

P009E Fuel Pressure Relief Control Performance/Stuck Off

How urgent? Get it checked in the next few days

What it means

The electric fuel pressure relief valve does not seem to open when the computer tells it to, so fuel pressure is not dropping the way it should.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Watch commanded and actual rail pressure with a scan tool
  2. Check the fuel for water or debris

Signs you may notice

  • Check engine light on
  • Rough running or stumbling when slowing down
  • Possible limp mode

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonSticking fuel pressure relief valve
  • CommonContaminated fuel
  • PossibleFaulty fuel rail pressure sensor
  • PossibleWiring with high resistance

Typical repair once the cause is confirmed

Usually a new fuel pressure relief valve, plus a fuel filter if the fuel is contaminated.

Walk through it step by step: Check engine light on →

Common questions

What does P009E mean?

The electric fuel pressure relief valve does not seem to open when the computer tells it to, so fuel pressure is not dropping the way it should.

Can I drive with code P009E?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P009E?

Common possibilities to test include: sticking fuel pressure relief valve; contaminated fuel; faulty fuel rail pressure sensor; wiring with high resistance. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.