Home › Code lookup › P00AA
Powertrain code · Fuel and air

P00AA Intake Air Temperature Sensor 1 Circuit (Bank 2)

How urgent? Book a check when convenient

What it means

Intake air temperature sensor 1 on bank 2 tells the computer how warm the incoming air is. The computer found a fault in the circuit from this sensor.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the sensor connector and wiring
  2. Compare its reading with other temperature sensors after a cold soak

Signs you may notice

  • Check engine light on
  • Usually little change in driving
  • Possible rough running or lower fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty intake air temperature sensor 1
  • CommonDamaged wiring or corroded connector
  • PossibleSensor unplugged after other work
  • PossibleEngine computer fault

Typical repair once the cause is confirmed

Usually a new intake air temperature sensor or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace intake air temperature sensor. Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P00AA mean?

Intake air temperature sensor 1 on bank 2 tells the computer how warm the incoming air is. The computer found a fault in the circuit from this sensor.

Can I drive with code P00AA?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P00AA?

Common possibilities to test include: faulty intake air temperature sensor 1; damaged wiring or corroded connector; sensor unplugged after other work; engine computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.