P00AC Intake Air Temperature Sensor 1 Circuit Low (Bank 2)
What it means
Intake air temperature sensor 1 on bank 2 tells the computer how warm the incoming air is. The computer found a signal that is too low (often reads very hot) from this sensor.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the sensor connector and wiring
- Compare its reading with other temperature sensors after a cold soak
Signs you may notice
- Check engine light on
- Usually little change in driving
- Possible rough running or lower fuel economy
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty intake air temperature sensor 1
- CommonDamaged wiring or corroded connector
- PossibleSensor unplugged after other work
- PossibleEngine computer fault
Typical repair once the cause is confirmed
Usually a new intake air temperature sensor or a wiring repair.
Common questions
What does P00AC mean?
Intake air temperature sensor 1 on bank 2 tells the computer how warm the incoming air is. The computer found a signal that is too low (often reads very hot) from this sensor.
Can I drive with code P00AC?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P00AC?
Common possibilities to test include: faulty intake air temperature sensor 1; damaged wiring or corroded connector; sensor unplugged after other work; engine computer fault. A shop should confirm the cause before replacing parts.