Home › Code lookup › P00B6
Powertrain code · Cooling

P00B6 Radiator Coolant Temperature/Engine Coolant Temperature Correlation

How urgent? Book a check when convenient

What it means

After the engine has cooled down, the radiator coolant temperature and engine coolant temperature readings should be close. The computer found they disagree by too much.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the coolant level
  2. Compare both readings after the car sits overnight
  3. Watch both readings as the engine warms up

Signs you may notice

  • Check engine light on
  • Cooling fans may run more than normal

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty radiator coolant temperature sensor
  • CommonFaulty engine coolant temperature sensor
  • PossibleThermostat stuck open
  • PossibleLow coolant or air in the cooling system

Typical repair once the cause is confirmed

Usually replacing whichever sensor reads wrong, or a thermostat if it is stuck open.

Walk through it step by step: Temperature gauge goes up and down →

Common questions

What does P00B6 mean?

After the engine has cooled down, the radiator coolant temperature and engine coolant temperature readings should be close. The computer found they disagree by too much.

Can I drive with code P00B6?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P00B6?

Common possibilities to test include: faulty radiator coolant temperature sensor; faulty engine coolant temperature sensor; thermostat stuck open; low coolant or air in the cooling system. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.