Home › Code lookup › P00B9
Powertrain code · Fuel and air

P00B9 Low Pressure Fuel System Pressure - Too Low, Low Ambient Temperature

How urgent? Get it checked in the next few days

What it means

In cold weather, the computer measured that the low-pressure fuel supply (from the tank pump) is lower than it should be.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. On diesels, make sure winter-blend fuel or an anti-gel additive is being used
  2. Replace the fuel filter and drain any water
  3. Check low-side fuel pressure with a gauge

Signs you may notice

  • Check engine light on
  • Hard starting or stalling in cold weather
  • Loss of power

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonDiesel fuel gelling or waxing in the cold
  • CommonClogged fuel filter
  • CommonWeak in-tank fuel pump
  • PossibleWater in the fuel freezing

Typical repair once the cause is confirmed

Often a new fuel filter and winter-grade fuel on diesels; otherwise a weak fuel pump.

Walk through it step by step: Hard to start when cold →

Common questions

What does P00B9 mean?

In cold weather, the computer measured that the low-pressure fuel supply (from the tank pump) is lower than it should be.

Can I drive with code P00B9?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P00B9?

Common possibilities to test include: diesel fuel gelling or waxing in the cold; clogged fuel filter; weak in-tank fuel pump; water in the fuel freezing. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.