Home › Code lookup › P06AF
Powertrain code · Computer

P06AF Torque Management System - Forced Engine Shutdown

How urgent? Stop driving as soon as it's safe. This can cause damage or be unsafe.

What it means

The computer shut the engine off on purpose as a safety measure because it saw the engine making power that was not requested.

Can I keep driving?

No, not until it's checked. The computer shut the engine off because it saw power you didn't ask for, so it no longer trusts throttle control. If it restarts, drive only to a safe spot or a very close shop, and have it towed if it shuts off again or the pedal feels wrong.

What to test before replacing parts

Read all stored codes, especially throttle and pedal codes, then check pedal and throttle sensor signals, the throttle body and wiring, and look for software updates before replacing the computer.

  1. Read all other stored codes, especially throttle and pedal codes
  2. Inspect the throttle body and its wiring
  3. Check for software updates or service bulletins

Signs you may notice

  • Engine shuts off unexpectedly
  • Check engine light on
  • Reduced power or limp mode codes stored with it

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty accelerator pedal or throttle position sensor signal
  • CommonSticking or faulty electronic throttle body
  • PossibleInternal computer fault
  • PossibleComputer software that needs an update

Typical repair once the cause is confirmed

Repair the throttle, pedal or sensor fault that triggered the shutdown; sometimes a computer update or replacement.

Walk through it step by step: Engine stalls while driving →

Common questions

What does P06AF mean?

The computer shut the engine off on purpose as a safety measure because it saw the engine making power that was not requested.

Can I drive with code P06AF?

No, not until it's checked. The computer shut the engine off because it saw power you didn't ask for, so it no longer trusts throttle control. If it restarts, drive only to a safe spot or a very close shop, and have it towed if it shuts off again or the pedal feels wrong.

What causes P06AF?

Common possibilities to test include: faulty accelerator pedal or throttle position sensor signal; sticking or faulty electronic throttle body; internal computer fault; computer software that needs an update. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.