P2104 Throttle Actuator Control System - Forced Idle
What it means
The engine computer has found a problem with the electronic throttle system and is protecting the engine by holding the engine at idle no matter how far you press the gas. Another throttle or pedal code usually explains why.
Can I keep driving?
Not safely. The computer is holding the engine at idle, so the car may only creep and can't keep up with traffic. Get off the road and have it towed; driving at idle speed in traffic is dangerous.
What to test before replacing parts
Read the throttle, pedal and brake switch codes stored with it, check the pedal and throttle sensor signals and wiring, and inspect the throttle body before replacing anything.
- Read all stored codes and fix the other throttle or pedal codes first
- Inspect the throttle body and its connector
Signs you may notice
- Check engine light on
- Engine stays at idle and won't speed up
- Reduced engine power warning may show
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonThrottle body or pedal sensor fault (see other stored codes)
- CommonDirty or sticking throttle body
- PossibleWiring or connector problem at the throttle or pedal
- PossibleBrake switch problem
- PossibleEngine computer problem
Typical repair once the cause is confirmed
Repair the underlying throttle, pedal or wiring fault; this code clears once that is fixed.
Common questions
What does P2104 mean?
The engine computer has found a problem with the electronic throttle system and is protecting the engine by holding the engine at idle no matter how far you press the gas. Another throttle or pedal code usually explains why.
Can I drive with code P2104?
Not safely. The computer is holding the engine at idle, so the car may only creep and can't keep up with traffic. Get off the road and have it towed; driving at idle speed in traffic is dangerous.
What causes P2104?
Common possibilities to test include: throttle body or pedal sensor fault (see other stored codes); dirty or sticking throttle body; wiring or connector problem at the throttle or pedal; brake switch problem. A shop should confirm the cause before replacing parts.