Home › Code lookup › P2108
Powertrain code · Computer

P2108 Throttle Actuator Control Module Performance

How urgent? Get it checked in the next few days

What it means

The throttle control part of the engine computer isn't performing as expected. It's often triggered by voltage or wiring problems around the throttle system.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check battery and charging voltage and ground connections
  2. Check for other throttle codes and service bulletins

Signs you may notice

  • Check engine light on
  • Reduced engine power or limp mode
  • Poor throttle response

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLow battery or charging voltage
  • CommonPoor computer ground
  • PossibleThrottle body fault
  • PossibleInternal engine computer fault

Typical repair once the cause is confirmed

Correct voltage and ground problems; replace or reprogram the computer only after other causes are ruled out.

Repair costInsufficient verified pricing for this vehicle and repair
Replace or reprogram engine computer. Prepare an itemized shop request.
Walk through it step by step: Reduced engine power / limp mode →

Common questions

What does P2108 mean?

The throttle control part of the engine computer isn't performing as expected. It's often triggered by voltage or wiring problems around the throttle system.

Can I drive with code P2108?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2108?

Common possibilities to test include: low battery or charging voltage; poor computer ground; throttle body fault; internal engine computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.