Home › Code lookup › P2106
Powertrain code · Speed and idle control

P2106 Throttle Actuator Control System - Forced Limited Power

How urgent? Get it checked in the next few days

What it means

The engine computer has found a problem with the electronic throttle system and is protecting the engine by limiting engine power. Another throttle or pedal code usually explains why.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Read all stored codes and fix the other throttle or pedal codes first
  2. Inspect the throttle body and its connector

Signs you may notice

  • Check engine light on
  • Limited power and slow acceleration
  • Reduced engine power warning may show

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonThrottle body or pedal sensor fault (see other stored codes)
  • CommonDirty or sticking throttle body
  • PossibleWiring or connector problem at the throttle or pedal
  • PossibleBrake switch problem
  • PossibleEngine computer problem

Typical repair once the cause is confirmed

Repair the underlying throttle, pedal or wiring fault; this code clears once that is fixed.

Repair costInsufficient verified pricing for this vehicle and repair
Replace electronic throttle body. Prepare an itemized shop request.

Known on these vehicles

Walk through it step by step: Reduced engine power / limp mode →

Common questions

What does P2106 mean?

The engine computer has found a problem with the electronic throttle system and is protecting the engine by limiting engine power. Another throttle or pedal code usually explains why.

Can I drive with code P2106?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2106?

Common possibilities to test include: throttle body or pedal sensor fault (see other stored codes); dirty or sticking throttle body; wiring or connector problem at the throttle or pedal; brake switch problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.