P2110 Throttle Actuator Control System - Forced Limited RPM
What it means
The engine computer has found a problem with the electronic throttle system and is protecting the engine by capping how high the engine will rev. Another throttle or pedal code usually explains why.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Read all stored codes and fix the other throttle or pedal codes first
- Inspect the throttle body and its connector
Signs you may notice
- Check engine light on
- Engine won't rev past a low limit
- Reduced engine power warning may show
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonThrottle body or pedal sensor fault (see other stored codes)
- CommonDirty or sticking throttle body
- PossibleWiring or connector problem at the throttle or pedal
- PossibleBrake switch problem
- PossibleEngine computer problem
Typical repair once the cause is confirmed
Repair the underlying throttle, pedal or wiring fault; this code clears once that is fixed.
Common questions
What does P2110 mean?
The engine computer has found a problem with the electronic throttle system and is protecting the engine by capping how high the engine will rev. Another throttle or pedal code usually explains why.
Can I drive with code P2110?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2110?
Common possibilities to test include: throttle body or pedal sensor fault (see other stored codes); dirty or sticking throttle body; wiring or connector problem at the throttle or pedal; brake switch problem. A shop should confirm the cause before replacing parts.