P2107 Throttle Actuator Control Module Processor
What it means
The part of the computer that controls the electronic throttle has found an internal fault. The engine may go into limp mode to stay safe.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check battery voltage, charging system and computer grounds
- Check for software updates or service bulletins
Signs you may notice
- Check engine light on
- Reduced engine power or limp mode
- Engine may idle only
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonInternal engine computer or throttle control module fault
- PossibleLow system voltage or poor computer ground
- PossibleWater damage to the computer
- PossibleSoftware issue needing an update
Typical repair once the cause is confirmed
Fix voltage or ground problems first; if the code returns, the computer may need reprogramming or replacement.
Common questions
What does P2107 mean?
The part of the computer that controls the electronic throttle has found an internal fault. The engine may go into limp mode to stay safe.
Can I drive with code P2107?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2107?
Common possibilities to test include: internal engine computer or throttle control module fault; low system voltage or poor computer ground; water damage to the computer; software issue needing an update. A shop should confirm the cause before replacing parts.