Home › Code lookup › P2408
Powertrain code · Emissions

P2408 Fuel Cap Sensor/Switch Circuit

How urgent? Book a check when convenient

What it means

The engine computer has found a problem in the circuit for the fuel cap sensor/switch, which checks that the fuel cap or capless filler door is closed. It usually points to wiring, a connector or the sensor itself.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the fuel cap switch connector and wiring for damage or corrosion
  2. Check the sensor power, ground and signal with a meter

Signs you may notice

  • Check engine light on
  • Check fuel cap message may show
  • Usually no change in how the car drives

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty fuel cap sensor/switch
  • CommonDamaged, corroded or unplugged connector
  • PossibleBroken or chafed wiring
  • PossibleEngine computer problem (rare)

Typical repair once the cause is confirmed

Repair any damaged wiring or connector first; if the circuit tests good, replace the fuel cap sensor/switch.

Repair costInsufficient verified pricing for this vehicle and repair
Replace fuel cap sensor/switch. Prepare an itemized shop request.

Common questions

What does P2408 mean?

The engine computer has found a problem in the circuit for the fuel cap sensor/switch, which checks that the fuel cap or capless filler door is closed. It usually points to wiring, a connector or the sensor itself.

Can I drive with code P2408?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2408?

Common possibilities to test include: faulty fuel cap sensor/switch; damaged, corroded or unplugged connector; broken or chafed wiring; engine computer problem (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.