Home › Code lookup › P2801
Powertrain code · Transmission

P2801 Transmission Range Sensor "B" Circuit Range/Performance

How urgent? Get it checked in the next few days

What it means

The computer is watching the transmission range sensor "B" circuit and is getting a signal that does not make sense for current conditions. This sensor tells the computers which gear position (P, R, N, D) the shifter is in.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for other codes that point to the underlying problem
  2. Compare the transmission range sensor "B" circuit reading with expected values in live data
  3. Inspect the wiring and connector

Signs you may notice

  • Check engine light on
  • Gear indicator may show the wrong gear
  • May not start in Park or Neutral
  • Harsh or wrong shifts possible

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonRange sensor out of adjustment or worn
  • CommonFailing or sticking transmission range sensor
  • CommonShift cable out of adjustment
  • PossibleWiring or connector with high resistance
  • PossibleComputer software that needs an update

Typical repair once the cause is confirmed

Find out whether the transmission range sensor itself or the system it works with is at fault, then repair or replace as needed.

Walk through it step by step: Car won't start →

Common questions

What does P2801 mean?

The computer is watching the transmission range sensor "B" circuit and is getting a signal that does not make sense for current conditions. This sensor tells the computers which gear position (P, R, N, D) the shifter is in.

Can I drive with code P2801?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2801?

Common possibilities to test include: range sensor out of adjustment or worn; failing or sticking transmission range sensor; shift cable out of adjustment; wiring or connector with high resistance. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.