P2806 Transmission Range Sensor Alignment
What it means
The gear position sensor is not lined up correctly with the shifter.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check whether transmission work was done recently
- Check shifter alignment in each position
Signs you may notice
- Check engine light on
- Gear indicator may show the wrong gear
- May not start in Park or Neutral
- Harsh or wrong shifts possible
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonRange sensor not adjusted after transmission work
- CommonShift cable stretched or out of adjustment
- PossibleWorn range sensor
Typical repair once the cause is confirmed
Adjust the range sensor and shift cable; replace the sensor if worn.
Common questions
What does P2806 mean?
The gear position sensor is not lined up correctly with the shifter.
Can I drive with code P2806?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2806?
Common possibilities to test include: range sensor not adjusted after transmission work; shift cable stretched or out of adjustment; worn range sensor. A shop should confirm the cause before replacing parts.