U0415 Invalid Data Received From Anti-Lock Brake System (ABS) Control Module
What it means
Another module received a message from the ABS control module that does not make sense, such as a value that is out of range or does not add up. It is part of the anti-lock brake and stability control system.
Can I keep driving?
Normal braking usually still works, but ABS and stability control may be off. Leave extra space and brake gently, especially on wet or icy roads. If the brake pedal feels wrong or the red brake warning light comes on, stop driving and get it checked.
What to test before replacing parts
Read ABS module codes, especially wheel speed sensor faults, and check ABS power, grounds and network wiring before replacing the ABS module.
- Check the ABS control module for its own stored codes and fix those first
- Test the battery and grounds
- Check for software updates or service bulletins
Signs you may notice
- ABS, traction control or stability light on
- ABS and stability control may be turned off
- Normal braking usually still works
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty or dirty wheel speed sensor
- CommonThe ABS control module needs a software update
- CommonLow battery voltage or poor ground causing bad messages
- PossibleNetwork wiring problem or interference
- PossibleFailed ABS control module
Typical repair once the cause is confirmed
Fix any fault in the ABS control module or its sensors, then update the software if needed.
Common questions
What does U0415 mean?
Another module received a message from the ABS control module that does not make sense, such as a value that is out of range or does not add up. It is part of the anti-lock brake and stability control system.
Can I drive with code U0415?
Normal braking usually still works, but ABS and stability control may be off. Leave extra space and brake gently, especially on wet or icy roads. If the brake pedal feels wrong or the red brake warning light comes on, stop driving and get it checked.
What causes U0415?
Common possibilities to test include: faulty or dirty wheel speed sensor; the abs control module needs a software update; low battery voltage or poor ground causing bad messages; network wiring problem or interference. A shop should confirm the cause before replacing parts.