U0419 Invalid Data Received From Steering Effort Control Module
What it means
Another module received a message from the steering effort control module that does not make sense, such as a value that is out of range or does not add up. It is part of the steering system.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the steering effort control module for its own stored codes and fix those first
- Test the battery and grounds
- Check for software updates or service bulletins
Signs you may notice
- Power steering or steering warning light on
- Steering may feel heavy
- Stability control may be turned off
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty sensor or input feeding the steering effort control module
- CommonThe steering effort control module needs a software update
- CommonLow battery voltage or poor ground causing bad messages
- PossibleNetwork wiring problem or interference
- PossibleFailed steering effort control module
Typical repair once the cause is confirmed
Fix any fault in the steering effort control module or its sensors, then update the software if needed.
Common questions
What does U0419 mean?
Another module received a message from the steering effort control module that does not make sense, such as a value that is out of range or does not add up. It is part of the steering system.
Can I drive with code U0419?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes U0419?
Common possibilities to test include: faulty sensor or input feeding the steering effort control module; the steering effort control module needs a software update; low battery voltage or poor ground causing bad messages; network wiring problem or interference. A shop should confirm the cause before replacing parts.