Home › Code lookup › U0421
Network code · Network

U0421 Invalid Data Received From Suspension Control Module "A"

How urgent? Book a check when convenient

What it means

Another module received a message from the suspension control module that does not make sense, such as a value that is out of range or does not add up. It controls part of the suspension or ride system.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the suspension control module for its own stored codes and fix those first
  2. Test the battery and grounds
  3. Check for software updates or service bulletins

Signs you may notice

  • Suspension or chassis warning light on
  • Ride height or firmness may change

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty sensor or input feeding the suspension control module
  • CommonThe suspension control module needs a software update
  • CommonLow battery voltage or poor ground causing bad messages
  • PossibleNetwork wiring problem or interference
  • PossibleFailed suspension control module

Typical repair once the cause is confirmed

Fix any fault in the suspension control module or its sensors, then update the software if needed.

Common questions

What does U0421 mean?

Another module received a message from the suspension control module that does not make sense, such as a value that is out of range or does not add up. It controls part of the suspension or ride system.

Can I drive with code U0421?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes U0421?

Common possibilities to test include: faulty sensor or input feeding the suspension control module; the suspension control module needs a software update; low battery voltage or poor ground causing bad messages; network wiring problem or interference. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.