U0423 Invalid Data Received From Instrument Panel Control Module
What it means
Another module received a message from the instrument cluster that does not make sense, such as a value that is out of range or does not add up. It is the instrument cluster that shows your gauges and warning lights.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the instrument cluster for its own stored codes and fix those first
- Test the battery and grounds
- Check for software updates or service bulletins
Signs you may notice
- Gauges may stop working or drop to zero
- Warning lights may stay on or flicker
- Chimes and messages may stop
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty sensor or input feeding the instrument cluster
- CommonThe instrument cluster needs a software update
- CommonLow battery voltage or poor ground causing bad messages
- PossibleNetwork wiring problem or interference
- PossibleFailed instrument cluster
Typical repair once the cause is confirmed
Fix any fault in the instrument cluster or its sensors, then update the software if needed.
Common questions
What does U0423 mean?
Another module received a message from the instrument cluster that does not make sense, such as a value that is out of range or does not add up. It is the instrument cluster that shows your gauges and warning lights.
Can I drive with code U0423?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes U0423?
Common possibilities to test include: faulty sensor or input feeding the instrument cluster; the instrument cluster needs a software update; low battery voltage or poor ground causing bad messages; network wiring problem or interference. A shop should confirm the cause before replacing parts.