U0429 Invalid Data Received From Steering Column Control Module
What it means
Another module received a message from the steering column control module that does not make sense, such as a value that is out of range or does not add up. It runs a comfort or convenience feature.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the steering column control module for its own stored codes and fix those first
- Test the battery and grounds
- Check for software updates or service bulletins
Signs you may notice
- The feature that module controls may not work
- Other modules may set related codes
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty sensor or input feeding the steering column control module
- CommonThe steering column control module needs a software update
- CommonLow battery voltage or poor ground causing bad messages
- PossibleNetwork wiring problem or interference
- PossibleFailed steering column control module
Typical repair once the cause is confirmed
Fix any fault in the steering column control module or its sensors, then update the software if needed.
Common questions
What does U0429 mean?
Another module received a message from the steering column control module that does not make sense, such as a value that is out of range or does not add up. It runs a comfort or convenience feature.
Can I drive with code U0429?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes U0429?
Common possibilities to test include: faulty sensor or input feeding the steering column control module; the steering column control module needs a software update; low battery voltage or poor ground causing bad messages; network wiring problem or interference. A shop should confirm the cause before replacing parts.