Home › Code lookup › U0430
Network code · Network

U0430 Invalid Data Received From Tire Pressure Monitor Module

How urgent? Book a check when convenient

What it means

Another module received a message from the tire pressure monitor module that does not make sense, such as a value that is out of range or does not add up. It reads the tire pressure sensors.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the tire pressure monitor module for its own stored codes and fix those first
  2. Test the battery and grounds
  3. Check for software updates or service bulletins

Signs you may notice

  • Tire pressure light on or flashing
  • Tire pressures may not display

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonTire sensors not relearned after a tire rotation or replacement
  • CommonThe tire pressure monitor module needs a software update
  • CommonLow battery voltage or poor ground causing bad messages
  • PossibleNetwork wiring problem or interference
  • PossibleFailed tire pressure monitor module

Typical repair once the cause is confirmed

Fix any fault in the tire pressure monitor module or its sensors, then update the software if needed.

Walk through it step by step: Tire pressure light on →

Common questions

What does U0430 mean?

Another module received a message from the tire pressure monitor module that does not make sense, such as a value that is out of range or does not add up. It reads the tire pressure sensors.

Can I drive with code U0430?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes U0430?

Common possibilities to test include: tire sensors not relearned after a tire rotation or replacement; the tire pressure monitor module needs a software update; low battery voltage or poor ground causing bad messages; network wiring problem or interference. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.