U0431 Invalid Data Received From Body Control Module "A"
What it means
Another module received a message from the body control module "A" that does not make sense, such as a value that is out of range or does not add up. It runs many body features such as lights, locks, wipers and the security system.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the body control module "A" for its own stored codes and fix those first
- Test the battery and grounds
- Check for software updates or service bulletins
Signs you may notice
- Several warning lights on at once
- Lights, locks or wipers may act strangely
- Car may not start or the battery may drain
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty sensor or input feeding the body control module "A"
- CommonThe body control module "A" needs a software update
- CommonLow battery voltage or poor ground causing bad messages
- PossibleNetwork wiring problem or interference
- PossibleFailed body control module "A"
Typical repair once the cause is confirmed
Fix any fault in the body control module "A" or its sensors, then update the software if needed.
Common questions
What does U0431 mean?
Another module received a message from the body control module "A" that does not make sense, such as a value that is out of range or does not add up. It runs many body features such as lights, locks, wipers and the security system.
Can I drive with code U0431?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes U0431?
Common possibilities to test include: faulty sensor or input feeding the body control module "a"; the body control module "a" needs a software update; low battery voltage or poor ground causing bad messages; network wiring problem or interference. A shop should confirm the cause before replacing parts.