How to reset the oil change and tire pressure lights on a Mercedes-Benz
These two lights are reminders, not faults. Do the work first, then reset. Everything else on your dash is a warning, and clearing it does not fix anything.
Oil change or maintenance reminder
- Have the oil and filter changed first; this only clears the reminder after the work is actually done.
- Switch the ignition on without starting off, and leave the car parked.
- Use the left-hand touch control or arrow buttons on the steering wheel to open the Service menu in the instrument display.
- Scroll to the service or ASSYST PLUS entry that shows the distance or time to the next service, and press OK.
- Choose the option that confirms the service that was carried out, then answer yes and press OK to confirm.
- Switch the ignition off, then on again, and check the display now shows a full interval.
Menu wording differs by model and year, and some cars do not offer the confirm option at all. If yours does not, a shop with Mercedes diagnostic equipment has to enter it.
- Only reset after the oil change is finished, because an accidental reset can be undone only with Mercedes diagnostic equipment.
- Turn the key to the position that powers up the dash without starting the engine.
- Press the system selection button on the steering wheel until the cluster shows the basic display with the total and trip mileage.
- Use the scroll button to step through until the service symbol appears with the remaining distance, remaining time, or a service overdue message.
- Press and hold the reset button on the instrument cluster for about three seconds, until it asks you to confirm resetting the service interval.
- Press that reset button again within five seconds; the display then shows the new interval.
The reset button sits on the left of the cluster on most of these cars and on the right on the CL. Confirm the new interval appears before switching off.
Sources: Manuals+ · Mercedes-Benz
Tire pressure (TPMS) light
- Set all four tires to the cold pressure listed on the sticker in the driver's door opening before you touch any menu.
- Switch the ignition on but do not drive off yet.
- On the central display, open Vehicle and then the Tires or tire pressure screen.
- Select Restart at the bottom of that screen.
- Answer yes when the car asks whether the current tire pressures are correct.
- Drive for a few minutes; the live pressure readings and the all-clear come back once the car has sampled them.
Restarting makes whatever pressures are in the tires right now the new reference, so a soft tire would be accepted as normal. Set the pressures first, cold.
- Inflate all four tires cold to the pressure on the door jamb sticker first.
- Switch the ignition on, or turn the key to the second position, and stay parked.
- Use the left and right arrow buttons on the steering wheel to bring up the Service menu, then press OK.
- Use the up and down buttons to reach Tire Pressure and press OK to see the current pressures.
- Press the down button; the display asks whether to use the current pressures as the new reference values.
- Choose yes and press OK; the display confirms the monitor has restarted.
- Drive a few minutes so the readings return. If wheels were moved around, positions may look wrong until then.
On these cars the confirmation may read tire pressure monitor restarted or run flat indicator restarted, depending on the year.
- Set all four tires cold to the door jamb sticker pressure before restarting anything.
- Switch the ignition on without driving off.
- Use the steering wheel buttons to open the Service menu and select Tire Pressure.
- Choose the restart option and confirm it.
- Drive for a longer stretch than a sensor car needs, since this system relearns from wheel speeds rather than from sensors.
If the warning returns after a proper relearn drive, treat it as a real leak or a failed sensor rather than a reset that did not take.
Sources: Mercedes-Benz of Warwick · ManualOwl
Worth knowing on a Mercedes-Benz
Mercedes tracks the service reminder as a date as well as a distance, so a car driven very little can still call for service. An accidental ASSYST reset can only be put right by a shop with Mercedes diagnostic equipment, so do the service first.