P0017 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B)
What it means
The crankshaft and camshaft must stay in exact step. The computer compared their sensor signals and found the timing between the crank and the "B" (usually exhaust) camshaft on bank 1 is out of the expected range.
Can I keep driving?
Don't treat this as routine. If it runs smoothly, drive gently to a shop soon and check the oil level. If it misfires, loses power, cranks a long time or rattles loudly, stop driving; timing that has jumped can let valves hit pistons on many engines and cause major damage.
What to test before replacing parts
Check oil level, read cam-to-crank correlation data, and scope the crank and cam sensor signals. Verify mechanical timing marks before replacing sensors, phasers or a timing chain.
- Check the oil level and condition
- Check the sensor wiring and connectors
- Have a shop check cam/crank sync with a scope or scan tool before replacing the timing chain
Signs you may notice
- Check engine light on
- Hard starting or long cranking
- Rough idle, misfire or loss of power
- Rattle from the timing chain area at startup
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonStretched timing chain or worn chain tensioner
- CommonTiming chain or belt jumped a tooth
- CommonFaulty camshaft or crankshaft position sensor
- PossibleSticking oil control valve or worn cam phaser
- PossibleDamaged reluctor (tone) ring or sensor wiring problem
Typical repair once the cause is confirmed
Often a timing chain, tensioner and guides. Sometimes it is just a camshaft or crankshaft sensor, so test before replacing major parts.
Known on these vehicles
Common questions
What does P0017 mean?
The crankshaft and camshaft must stay in exact step. The computer compared their sensor signals and found the timing between the crank and the "B" (usually exhaust) camshaft on bank 1 is out of the expected range.
Can I drive with code P0017?
Don't treat this as routine. If it runs smoothly, drive gently to a shop soon and check the oil level. If it misfires, loses power, cranks a long time or rattles loudly, stop driving; timing that has jumped can let valves hit pistons on many engines and cause major damage.
What causes P0017?
Common possibilities to test include: stretched timing chain or worn chain tensioner; timing chain or belt jumped a tooth; faulty camshaft or crankshaft position sensor; sticking oil control valve or worn cam phaser. A shop should confirm the cause before replacing parts.