P0092 Fuel Pressure Regulator 1 Control Circuit High
What it means
On many diesel and direct-injection engines, the fuel pressure regulator is electronically controlled. The computer found a voltage that is too high in the circuit that operates it.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the regulator connector and wiring
- Measure the regulator resistance and compare to spec
Signs you may notice
- Check engine light on
- Hard starting, stalling or loss of power
- Possible limp mode
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonDamaged wiring or loose connector to the regulator
- CommonFailed fuel pressure regulator solenoid
- PossibleEngine computer driver fault
Typical repair once the cause is confirmed
Usually a wiring repair or a new fuel pressure regulator.
Common questions
What does P0092 mean?
On many diesel and direct-injection engines, the fuel pressure regulator is electronically controlled. The computer found a voltage that is too high in the circuit that operates it.
Can I drive with code P0092?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0092?
Common possibilities to test include: damaged wiring or loose connector to the regulator; failed fuel pressure regulator solenoid; engine computer driver fault. A shop should confirm the cause before replacing parts.