P0700 Transmission Control System (MIL Request)
What it means
The transmission computer found a problem and asked the engine computer to turn on the check engine light. This code is a messenger: the real fault is stored as a separate code in the transmission computer.
Can I keep driving?
It depends on the transmission fault behind it. If it shifts normally, you can usually drive gently to a shop soon. If it's stuck in one gear, slipping, jerking, or a transmission warning or overheat message appears, keep trips short and slow or get it towed to avoid more damage.
What to test before replacing parts
Read the codes stored in the transmission computer with a capable scanner and check fluid level and condition. P0700 is only a messenger; the real fault code decides what to test next.
- Use a scanner that can read transmission module codes, not just engine codes
- Check the transmission fluid level and condition
- Inspect the wiring and connectors at the transmission and its computer
Signs you may notice
- Check engine light on
- Transmission may be stuck in one gear (limp mode)
- Harsh, late or erratic shifting
- Other transmission warning lights or messages
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonAnother transmission fault stored in the transmission computer
- CommonFaulty transmission sensor or shift solenoid
- CommonLow or burnt transmission fluid
- PossibleWiring or connector problem at the transmission
- PossibleFaulty transmission control module
Typical repair once the cause is confirmed
Read the codes stored in the transmission computer and repair that fault. P0700 itself clears once the underlying problem is fixed.
Where it shows up
- Usually shows up together with a second transmission code that points to the real problem
Known on these vehicles
Common questions
What does P0700 mean?
The transmission computer found a problem and asked the engine computer to turn on the check engine light. This code is a messenger: the real fault is stored as a separate code in the transmission computer.
Can I drive with code P0700?
It depends on the transmission fault behind it. If it shifts normally, you can usually drive gently to a shop soon. If it's stuck in one gear, slipping, jerking, or a transmission warning or overheat message appears, keep trips short and slow or get it towed to avoid more damage.
What causes P0700?
Common possibilities to test include: another transmission fault stored in the transmission computer; faulty transmission sensor or shift solenoid; low or burnt transmission fluid; wiring or connector problem at the transmission. A shop should confirm the cause before replacing parts.