P070C Transmission Fluid Level Sensor Circuit Low
What it means
The transmission fluid level sensor's signal is lower than normal, often from a short to ground or a failed sensor.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the actual fluid level using the maker's procedure
- Inspect the sensor wiring and connector
Signs you may notice
- Check engine or transmission light on
- Low fluid warning may show even when fluid is fine
- Transmission may go into limp mode
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty transmission fluid level sensor
- CommonDamaged wiring or connector to the sensor
- PossibleActual fluid level too low or too high
- PossibleTransmission computer fault
Typical repair once the cause is confirmed
Confirm the true fluid level first, then repair the wiring or replace the fluid level sensor.
Common questions
What does P070C mean?
The transmission fluid level sensor's signal is lower than normal, often from a short to ground or a failed sensor.
Can I drive with code P070C?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P070C?
Common possibilities to test include: faulty transmission fluid level sensor; damaged wiring or connector to the sensor; actual fluid level too low or too high; transmission computer fault. A shop should confirm the cause before replacing parts.