P0706 Transmission Range Sensor A Circuit Range/Performance
What it means
The gear-position sensor is sending a signal, but it doesn't match what the computer expects for the gear you selected, or it shows two gears at once.
Can I keep driving?
Be careful. If the car starts in gear, rolls in Park, or the dash shows the wrong gear, don't drive it until it's fixed, since it may move when you don't expect it. If it only shifts a bit oddly, drive gently to a shop soon and use the parking brake whenever you park.
What to test before replacing parts
Watch the range sensor reading on a scanner in each gear to see if it is wrong or shows two gears at once; check adjustment, linkage and the connector for water before buying a sensor.
- Check that the shifter lines up with the gear shown on the dash
- Inspect the range sensor connector for water, corrosion or damage
- Check the range sensor readings with a scanner while moving through each gear
Signs you may notice
- Check engine light on
- Engine may not start in Park or Neutral, or may start in gear
- Gear indicator on the dash may be wrong or blank
- Harsh or wrong shifting, or limp mode
- Reverse lights may not work
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty transmission range sensor (neutral safety switch)
- CommonRange sensor out of adjustment
- CommonDamaged wiring or corroded connector at the sensor
- PossibleWorn or misadjusted shift cable or linkage
- PossibleFaulty transmission computer
Typical repair once the cause is confirmed
Usually adjusting or replacing the transmission range sensor, or repairing its wiring or the shift linkage.
Common questions
What does P0706 mean?
The gear-position sensor is sending a signal, but it doesn't match what the computer expects for the gear you selected, or it shows two gears at once.
Can I drive with code P0706?
Be careful. If the car starts in gear, rolls in Park, or the dash shows the wrong gear, don't drive it until it's fixed, since it may move when you don't expect it. If it only shifts a bit oddly, drive gently to a shop soon and use the parking brake whenever you park.
What causes P0706?
Common possibilities to test include: faulty transmission range sensor (neutral safety switch); range sensor out of adjustment; damaged wiring or corroded connector at the sensor; worn or misadjusted shift cable or linkage. A shop should confirm the cause before replacing parts.