Home › Code lookup › P0704
Powertrain code · Transmission

P0704 Clutch Switch Input Circuit Malfunction

How urgent? Book a check when convenient

What it means

On a manual-transmission car, the computer isn't getting a sensible signal from the switch that tells it when the clutch pedal is pressed.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check that the switch is in place and touched by the pedal
  2. Test the switch for on and off as the pedal moves

Signs you may notice

  • Check engine light on
  • Car may not start, or starts without the clutch pressed
  • Cruise control may not work or not cancel

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty or misadjusted clutch pedal switch
  • CommonDamaged wiring or connector at the clutch switch
  • PossibleBroken switch mounting or bumper on the clutch pedal

Typical repair once the cause is confirmed

Usually a new or readjusted clutch pedal switch, or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace clutch pedal switch. Prepare an itemized shop request.
Walk through it step by step: Car won't start →

Common questions

What does P0704 mean?

On a manual-transmission car, the computer isn't getting a sensible signal from the switch that tells it when the clutch pedal is pressed.

Can I drive with code P0704?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0704?

Common possibilities to test include: faulty or misadjusted clutch pedal switch; damaged wiring or connector at the clutch switch; broken switch mounting or bumper on the clutch pedal. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.