Home › Code lookup › P0712
Powertrain code · Transmission

P0712 Transmission Fluid Temperature Sensor A Circuit Low

How urgent? Get it checked in the next few days

What it means

The transmission temperature sensor signal is lower than normal, usually from a short to ground, which can make the computer think the fluid is extremely hot.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare the transmission temperature reading to engine coolant temperature on a cold start
  2. Check fluid level and condition
  3. Inspect the transmission connector and wiring

Signs you may notice

  • Check engine light on
  • Harsh or late shifts, especially when cold
  • Torque converter may not lock up, hurting fuel economy

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty transmission fluid temperature sensor
  • CommonDamaged wiring or connector (often the internal harness)
  • PossibleFluid actually overheating from low fluid or heavy towing

Typical repair once the cause is confirmed

Usually a new fluid temperature sensor (on many models part of the internal wiring harness) or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace transmission fluid temperature sensor. Prepare an itemized shop request.
Walk through it step by step: Harsh or late shifting →

Common questions

What does P0712 mean?

The transmission temperature sensor signal is lower than normal, usually from a short to ground, which can make the computer think the fluid is extremely hot.

Can I drive with code P0712?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0712?

Common possibilities to test include: faulty transmission fluid temperature sensor; damaged wiring or connector (often the internal harness); fluid actually overheating from low fluid or heavy towing. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.