P0714 Transmission Fluid Temperature Sensor A Circuit Intermittent
What it means
The transmission temperature sensor signal keeps dropping out, usually from a loose connection or damaged wire.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Compare the transmission temperature reading to engine coolant temperature on a cold start
- Check fluid level and condition
- Inspect the transmission connector and wiring
Signs you may notice
- Check engine light on
- Harsh or late shifts, especially when cold
- Torque converter may not lock up, hurting fuel economy
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty transmission fluid temperature sensor
- CommonDamaged wiring or connector (often the internal harness)
- PossibleFluid actually overheating from low fluid or heavy towing
Typical repair once the cause is confirmed
Usually a new fluid temperature sensor (on many models part of the internal wiring harness) or a wiring repair.
Common questions
What does P0714 mean?
The transmission temperature sensor signal keeps dropping out, usually from a loose connection or damaged wire.
Can I drive with code P0714?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0714?
Common possibilities to test include: faulty transmission fluid temperature sensor; damaged wiring or connector (often the internal harness); fluid actually overheating from low fluid or heavy towing. A shop should confirm the cause before replacing parts.