Home › Code lookup › P0715
Powertrain code · Transmission

P0715 Input/Turbine Speed Sensor A Circuit

How urgent? Get it checked in the next few days

What it means

The computer isn't getting a good signal from the sensor that measures how fast the transmission's input shaft is spinning, so it can't shift properly.

Can I keep driving?

Often drivable gently, but shifts may be harsh or it may stay in one gear, which makes merging and highway speeds risky. If it's in limp mode, avoid highways and get it to a shop soon. If it slips, flares in RPM or the speedometer quits, keep driving to a minimum.

What to test before replacing parts

Check fluid level and condition, inspect the sensor wiring and connector, and watch input speed on a scanner while driving to see if the signal drops out before replacing the sensor.

  1. Inspect the sensor connector and wiring for damage or oil
  2. Check fluid level and condition
  3. Watch input speed on a scanner while driving to see if the signal drops out

Signs you may notice

  • Check engine light on
  • Harsh, late or erratic shifts
  • Transmission stuck in one gear (limp mode)
  • Speedometer may act up on some models

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty input/turbine speed sensor
  • CommonDamaged wiring or connector to the sensor
  • PossibleLow or dirty transmission fluid
  • PossibleMetal debris on the sensor tip
  • PossibleTransmission computer fault

Typical repair once the cause is confirmed

Most often a new input speed sensor or a wiring repair; on some models the sensor is inside the transmission.

Repair costInsufficient verified pricing for this vehicle and repair
Replace input/turbine speed sensor. Prepare an itemized shop request.

Where it shows up

  • Frequently reported on Dodge Caravan and Chrysler Town and Country minivans
Walk through it step by step: Harsh or late shifting →

Common questions

What does P0715 mean?

The computer isn't getting a good signal from the sensor that measures how fast the transmission's input shaft is spinning, so it can't shift properly.

Can I drive with code P0715?

Often drivable gently, but shifts may be harsh or it may stay in one gear, which makes merging and highway speeds risky. If it's in limp mode, avoid highways and get it to a shop soon. If it slips, flares in RPM or the speedometer quits, keep driving to a minimum.

What causes P0715?

Common possibilities to test include: faulty input/turbine speed sensor; damaged wiring or connector to the sensor; low or dirty transmission fluid; metal debris on the sensor tip. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.