P0721 Output Shaft Speed Sensor Circuit Range/Performance
What it means
The output shaft speed signal doesn't match what the computer expects from other speed readings.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check whether the speedometer works
- Inspect the sensor connector and wiring
- Pull the sensor and check its tip for metal debris
Signs you may notice
- Check engine light on
- Speedometer may stop working or jump around
- Harsh or erratic shifts, or limp mode
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty output shaft speed sensor
- CommonDamaged wiring or connector to the sensor
- PossibleMetal debris on the sensor tip
Typical repair once the cause is confirmed
Most often a new output speed sensor or a wiring repair.
Common questions
What does P0721 mean?
The output shaft speed signal doesn't match what the computer expects from other speed readings.
Can I drive with code P0721?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0721?
Common possibilities to test include: faulty output shaft speed sensor; damaged wiring or connector to the sensor; metal debris on the sensor tip. A shop should confirm the cause before replacing parts.