P0739 TCM Engine Speed Output Circuit High
What it means
The engine speed signal sent out by the transmission computer is higher than it should be, often from an open wire or short to power.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect wiring and connectors at the transmission computer
- Check for other network or module codes
Signs you may notice
- Check engine light on
- Tachometer may read wrong or not work on some models
- Other modules may log related codes
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonDamaged wiring or connector in the engine speed output circuit
- PossibleFaulty transmission control module
- PossibleFault in a module receiving the signal
Typical repair once the cause is confirmed
Usually a wiring or connector repair; a transmission computer replacement only after the circuit tests good.
Common questions
What does P0739 mean?
The engine speed signal sent out by the transmission computer is higher than it should be, often from an open wire or short to power.
Can I drive with code P0739?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0739?
Common possibilities to test include: damaged wiring or connector in the engine speed output circuit; faulty transmission control module; fault in a module receiving the signal. A shop should confirm the cause before replacing parts.