P0740 Torque Converter Clutch Solenoid Circuit
What it means
There's an electrical problem with the solenoid that locks the torque converter at cruising speed. The car still drives, but fuel economy usually drops.
Can I keep driving?
Usually drivable to a shop in the next few days; expect higher RPM on the highway and worse fuel economy. If the engine stalls when you stop, the car shudders badly, or it slips or overheats, limit driving and get it checked right away, as stalling in traffic is dangerous.
What to test before replacing parts
Check fluid level and condition, measure solenoid resistance and the wiring through the transmission connector, and confirm the computer is commanding lockup before replacing the solenoid.
- Check fluid level and condition
- Check the solenoid resistance and wiring through the transmission connector
- Watch converter slip on a scanner at steady highway speed
Signs you may notice
- Check engine light on
- Worse fuel economy
- Higher RPM than normal at highway speed
- Shudder at 30 to 50 mph or stalling when coming to a stop
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty torque converter clutch solenoid
- CommonDamaged wiring or connector (often the internal harness)
- CommonLow or burnt transmission fluid
- PossibleWorn torque converter
- PossibleFaulty brake switch signal
Typical repair once the cause is confirmed
Most often a new torque converter clutch solenoid or a wiring repair; a worn converter needs the transmission removed.
Common questions
What does P0740 mean?
There's an electrical problem with the solenoid that locks the torque converter at cruising speed. The car still drives, but fuel economy usually drops.
Can I drive with code P0740?
Usually drivable to a shop in the next few days; expect higher RPM on the highway and worse fuel economy. If the engine stalls when you stop, the car shudders badly, or it slips or overheats, limit driving and get it checked right away, as stalling in traffic is dangerous.
What causes P0740?
Common possibilities to test include: faulty torque converter clutch solenoid; damaged wiring or connector (often the internal harness); low or burnt transmission fluid; worn torque converter. A shop should confirm the cause before replacing parts.