Home › Code lookup › P0741
Powertrain code · Transmission

P0741 Torque Converter Clutch Solenoid Circuit Performance/Stuck Off

How urgent? Get it checked in the next few days

What it means

The torque converter is supposed to lock up at cruising speed but it's slipping or not locking at all, so the engine revs higher than it should.

Can I keep driving?

Usually drivable gently for now, but a slipping converter makes heat that can hurt the transmission. Avoid towing and long highway runs. If you see a transmission temperature warning, smell burnt fluid, feel heavy shudder or the engine stalls at stops, get it checked right away.

What to test before replacing parts

Check fluid level and condition, watch commanded versus actual converter slip at steady highway speed, and test the solenoid and apply pressure before condemning the torque converter.

  1. Check fluid level and condition
  2. Check the solenoid resistance and wiring through the transmission connector
  3. Watch converter slip on a scanner at steady highway speed

Signs you may notice

  • Check engine light on
  • Worse fuel economy
  • Higher RPM than normal at highway speed
  • Shudder at 30 to 50 mph or stalling when coming to a stop

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonLow, burnt or contaminated transmission fluid
  • CommonWorn torque converter clutch
  • CommonFaulty or sticking torque converter clutch solenoid
  • PossibleWorn valve body or seals causing low apply pressure
  • PossibleEngine performance problem confusing the lockup test

Typical repair once the cause is confirmed

Most often a new torque converter clutch solenoid or a wiring repair; a worn converter needs the transmission removed.

Repair costInsufficient verified pricing for this vehicle and repair
Replace torque converter. Prepare an itemized shop request.

Where it shows up

  • Frequently seen on GM trucks and SUVs with the 4L60-E automatic

Known on these vehicles

Walk through it step by step: Gas mileage suddenly worse →

Common questions

What does P0741 mean?

The torque converter is supposed to lock up at cruising speed but it's slipping or not locking at all, so the engine revs higher than it should.

Can I drive with code P0741?

Usually drivable gently for now, but a slipping converter makes heat that can hurt the transmission. Avoid towing and long highway runs. If you see a transmission temperature warning, smell burnt fluid, feel heavy shudder or the engine stalls at stops, get it checked right away.

What causes P0741?

Common possibilities to test include: low, burnt or contaminated transmission fluid; worn torque converter clutch; faulty or sticking torque converter clutch solenoid; worn valve body or seals causing low apply pressure. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.