Home › Code lookup › P0742
Powertrain code · Transmission

P0742 Torque Converter Clutch Solenoid Circuit Stuck On

How urgent? Stop driving as soon as it's safe. This can cause damage or be unsafe.

What it means

The torque converter clutch is staying locked when it should release, which can stall the engine as you come to a stop.

Can I keep driving?

Be careful. A converter that stays locked can stall the engine when you stop, leaving you with heavy steering and harder braking in traffic. If it stalls or nearly stalls, don't keep driving; have it towed or move it only a short, low-traffic distance to a shop.

What to test before replacing parts

Confirm with a scanner whether the converter stays locked when stopping, then check the solenoid and its wiring for a short, and the valve body for sticking or debris.

  1. Check fluid level and condition
  2. Check the solenoid resistance and wiring through the transmission connector
  3. Watch converter slip on a scanner at steady highway speed

Signs you may notice

  • Engine stalls or nearly stalls when stopping
  • Car bucks or shudders at low speed
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonSticking torque converter clutch solenoid or valve
  • CommonWiring short keeping the solenoid powered
  • PossibleDebris in the valve body

Typical repair once the cause is confirmed

Most often a new torque converter clutch solenoid or a wiring repair; a worn converter needs the transmission removed.

Repair costInsufficient verified pricing for this vehicle and repair
Replace torque converter clutch solenoid. Prepare an itemized shop request.

Known on these vehicles

Walk through it step by step: Engine dies when stopping →

Common questions

What does P0742 mean?

The torque converter clutch is staying locked when it should release, which can stall the engine as you come to a stop.

Can I drive with code P0742?

Be careful. A converter that stays locked can stall the engine when you stop, leaving you with heavy steering and harder braking in traffic. If it stalls or nearly stalls, don't keep driving; have it towed or move it only a short, low-traffic distance to a shop.

What causes P0742?

Common possibilities to test include: sticking torque converter clutch solenoid or valve; wiring short keeping the solenoid powered; debris in the valve body. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.