Home › Code lookup › P0745
Powertrain code · Transmission

P0745 Pressure Control Solenoid A

How urgent? Get it checked in the next few days

What it means

There's a problem with the solenoid that controls the hydraulic pressure the transmission uses to apply its clutches, which affects how firmly it shifts.

Can I keep driving?

Drive gently and only as needed to get it checked soon. Wrong line pressure can make shifts slam or slip, and slipping wears clutches fast. If it's stuck in limp mode, won't engage a gear, slips or flares in RPM, avoid highways and consider a tow.

What to test before replacing parts

Check fluid level and condition, measure the solenoid resistance at the connector, and check line pressure with a gauge before replacing the solenoid, solenoid pack or valve body.

  1. Check fluid level and condition
  2. Measure the solenoid resistance through the transmission connector
  3. Check line pressure with a gauge if shifting is harsh or soft

Signs you may notice

  • Check engine light on
  • Harsh or very soft shifts
  • Slipping or delayed engagement
  • Transmission stuck in limp mode

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty pressure control solenoid
  • CommonDamaged wiring or connector (often the internal harness)
  • CommonLow or dirty transmission fluid
  • PossibleSticking valve in the valve body
  • PossibleTransmission computer fault

Typical repair once the cause is confirmed

Usually a new pressure control solenoid (on some models part of the solenoid pack or valve body) or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace pressure control solenoid. Prepare an itemized shop request.
Walk through it step by step: Harsh or late shifting →

Common questions

What does P0745 mean?

There's a problem with the solenoid that controls the hydraulic pressure the transmission uses to apply its clutches, which affects how firmly it shifts.

Can I drive with code P0745?

Drive gently and only as needed to get it checked soon. Wrong line pressure can make shifts slam or slip, and slipping wears clutches fast. If it's stuck in limp mode, won't engage a gear, slips or flares in RPM, avoid highways and consider a tow.

What causes P0745?

Common possibilities to test include: faulty pressure control solenoid; damaged wiring or connector (often the internal harness); low or dirty transmission fluid; sticking valve in the valve body. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.