Home › Code lookup › P0746
Powertrain code · Transmission

P0746 Pressure Control Solenoid A Performance or Stuck Off

How urgent? Get it checked in the next few days

What it means

The pressure control solenoid isn't changing pressure the way the computer commands, or it seems stuck off, often causing harsh shifts.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check fluid level and condition
  2. Measure the solenoid resistance through the transmission connector
  3. Check line pressure with a gauge if shifting is harsh or soft

Signs you may notice

  • Check engine light on
  • Harsh or very soft shifts
  • Slipping or delayed engagement

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty pressure control solenoid
  • CommonDamaged wiring or connector (often the internal harness)
  • CommonLow or dirty transmission fluid

Typical repair once the cause is confirmed

Usually a new pressure control solenoid (on some models part of the solenoid pack or valve body) or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace pressure control solenoid. Prepare an itemized shop request.
Walk through it step by step: Harsh or late shifting →

Common questions

What does P0746 mean?

The pressure control solenoid isn't changing pressure the way the computer commands, or it seems stuck off, often causing harsh shifts.

Can I drive with code P0746?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0746?

Common possibilities to test include: faulty pressure control solenoid; damaged wiring or connector (often the internal harness); low or dirty transmission fluid. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.