Home › Code lookup › P0750
Powertrain code · Transmission

P0750 Shift Solenoid A

How urgent? Get it checked in the next few days

What it means

There's a problem with shift solenoid A, one of the electric valves the computer uses to change gears.

Can I keep driving?

Often drivable gently to a shop soon, but it may be stuck in one gear, meaning weak acceleration or very high RPM at speed. Avoid highways if it can't shift properly. If it slips, slams into gear or a temperature warning appears, stop driving and get it checked.

What to test before replacing parts

Check fluid level and condition, measure solenoid A resistance, and command it on and off with a scanner to see if the gear changes before replacing the solenoid or solenoid pack.

  1. Check fluid level and condition
  2. Measure the solenoid resistance through the transmission connector
  3. Command the solenoid on and off with a scanner and watch for a gear change

Signs you may notice

  • Check engine light on
  • Transmission stuck in one gear or skipping gears
  • Harsh, late or erratic shifts
  • Worse fuel economy or high RPM at highway speed

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty shift solenoid
  • CommonDamaged wiring or connector (often the internal harness)
  • CommonLow or dirty transmission fluid
  • PossibleSticking valve or debris in the valve body
  • PossibleTransmission computer fault

Typical repair once the cause is confirmed

Usually a new shift solenoid (on many models sold as a solenoid pack) or a wiring repair; check the fluid first.

Repair costInsufficient verified pricing for this vehicle and repair
Replace shift solenoid A. Prepare an itemized shop request.

Known on these vehicles

Walk through it step by step: Harsh or late shifting →

Common questions

What does P0750 mean?

There's a problem with shift solenoid A, one of the electric valves the computer uses to change gears.

Can I drive with code P0750?

Often drivable gently to a shop soon, but it may be stuck in one gear, meaning weak acceleration or very high RPM at speed. Avoid highways if it can't shift properly. If it slips, slams into gear or a temperature warning appears, stop driving and get it checked.

What causes P0750?

Common possibilities to test include: faulty shift solenoid; damaged wiring or connector (often the internal harness); low or dirty transmission fluid; sticking valve or debris in the valve body. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.