P0760 Shift Solenoid C
What it means
There's a problem with shift solenoid C, one of the electric valves the computer uses to change gears.
Can I keep driving?
Often drivable gently to a shop soon, but it may be stuck in one gear, meaning weak acceleration or very high RPM at speed. Avoid highways if it can't shift properly. If it slips, slams into gear or a temperature warning appears, stop driving and get it checked.
What to test before replacing parts
Check fluid level and condition, measure solenoid C resistance, and command it on and off with a scanner to see if the gear changes before replacing the solenoid or solenoid pack.
- Check fluid level and condition
- Measure the solenoid resistance through the transmission connector
- Command the solenoid on and off with a scanner and watch for a gear change
Signs you may notice
- Check engine light on
- Transmission stuck in one gear or skipping gears
- Harsh, late or erratic shifts
- Worse fuel economy or high RPM at highway speed
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty shift solenoid
- CommonDamaged wiring or connector (often the internal harness)
- CommonLow or dirty transmission fluid
- PossibleSticking valve or debris in the valve body
- PossibleTransmission computer fault
Typical repair once the cause is confirmed
Usually a new shift solenoid (on many models sold as a solenoid pack) or a wiring repair; check the fluid first.
Common questions
What does P0760 mean?
There's a problem with shift solenoid C, one of the electric valves the computer uses to change gears.
Can I drive with code P0760?
Often drivable gently to a shop soon, but it may be stuck in one gear, meaning weak acceleration or very high RPM at speed. Avoid highways if it can't shift properly. If it slips, slams into gear or a temperature warning appears, stop driving and get it checked.
What causes P0760?
Common possibilities to test include: faulty shift solenoid; damaged wiring or connector (often the internal harness); low or dirty transmission fluid; sticking valve or debris in the valve body. A shop should confirm the cause before replacing parts.